• You're one step from joining Guitar Discussion Forum - The Fret.
    Create a free account to post, follow threads, and never miss an update.  Sign up free →

NPD: Bad Monkey..!

Guitar Discussion Forum - The Fret

Help Support TheFret.net:

poodlesrule

Well-known member
Joined
Aug 9, 2008
Messages
895
Reaction score
0
City & State/Province
A wee bit west of Boston
Bargain price B.M. on CL... woohoo!
Quick test shows there is quite a range on 'em knobs, heh?

Seller could have mentioned the battery wires were screwed up, but that's a detail, really.
 
Cool! That was my first pedal. Used for like $25 plus shipping. My connection thing was broken. I soldered a new one on and never looked back.
 
possible damage?

I wasn't paying attention when getting home with BM, and used an AC power block instead of a DC as spec'd - manual calls for PS200R, 9.6V DC, center-negative.
At least it was a 9V one...

Could just a few minutes under AC power damage the pedal's circuitry?
 
poodlesrule said:
I wasn't paying attention when getting home with BM, and used an AC power block instead of a DC as spec'd - manual calls for PS200R, 9.6V DC, center-negative.
At least it was a 9V one...

Could just a few minutes under AC power damage the pedal's circuitry?

I couldn't find a schematic online, but if Digitech is like many pedal manufacturers, they have a diode connected is series with the DC jack input. Worst case is that the diode will blow and will have to be replaced. The bad news is if you can't do it yourself, it would be fairly expensive to have fixed (especially for a $30 pedal).
 
If damage was done, it should be evident pretty much immediately upon playing through the pedal when properly powered. If the pedal has polarity protection in the circuit (and many do, to protect them from their owners :poke ;)), you should probably be OK....
 
duhvoodooman said:
If damage was done, it should be evident pretty much immediately upon playing through the pedal when properly powered.

Quick rough test says it still works!
I can't really compare it to a known good unit, as I just got this animal, and am pretty much a pedal newbie.
I had to find some clips to connect to a battery, as the unit's battery connector was ripped off. Pays to pick up some junk at the town dump!
 
Last edited:
duhvoodooman said:
If damage was done, it should be evident pretty much immediately upon playing through the pedal when properly powered. If the pedal has polarity protection in the circuit (and many do, to protect them from their owners :poke ;)), you should probably be OK....

Yeah, either it will work or it won't.

It sounds like no damage was done.
 
poodlesrule said:
I had to find some clips to connect to a battery, as the unit's battery connector was ripped off. Pays to pick up some junk at the town dump!
Is the battery adapter wiring to the board completely gone? You can get a replacement adapter easily enough. You'll pay more for the postage than for the part!

http://www.pedalpartsplus.com/mm5/m..._Code=PPP&Product_Code=2001&Category_Code=ACC

BTW, if you don't already have the correct "wall wart", what you want is a 9VDC adapter with a 2.5mm center-negative plug. I'd recommend one of these:

http://accessories.musiciansfriend....d-1-SPOT-SpaceSaving-9V-DC-Adapter?sku=151686

Plus, you can get a multi-plug cable to run up to 5 pedals off of it:

http://accessories.musiciansfriend....e-for-1-SPOT-Adapter?sku=151687&rec=product_A
 
duhvoodooman said:
Is the battery adapter wiring to the board completely gone?

No, it just look like if someone cut the red and black wires right at the battery connector.
I have a good electronic store nearby, and I can solder in a new battery connector pigtail, I think. New soldering iron launch soon (after spouse lets me off from cleaning my office mandate)!
 
duhvoodooman said:
Is the battery adapter wiring to the board completely gone? You can get a replacement adapter easily enough. You'll pay more for the postage than for the part!

http://www.pedalpartsplus.com/mm5/m..._Code=PPP&Product_Code=2001&Category_Code=ACC

BTW, if you don't already have the correct "wall wart", what you want is a 9VDC adapter with a 2.5mm center-negative plug. I'd recommend one of these:

http://accessories.musiciansfriend....d-1-SPOT-SpaceSaving-9V-DC-Adapter?sku=151686

Plus, you can get a multi-plug cable to run up to 5 pedals off of it:

http://accessories.musiciansfriend....e-for-1-SPOT-Adapter?sku=151687&rec=product_A

That is what I use with most of my pedals, including my DVM pedals and my Bad Monkey. Though I replaced the battery holder, and there is a battery in it, I basically never run on batteries.
 
Back
Top