duhvoodooman
Addicted to solder....
Almost posted this in the Mods, Projects, Repairs, Fixing forum! 
Well, I've put this off as long as I can. I've been suffering from a chronic case of "trigger finger", a.k.a. flexor tendinitis, in the index finger of my left hand for about a year and a half now. For those who are unfamiliar with this condition, it's a repetitive motion injury caused by the tendon of the finger being irritated by sliding through the tendon sheath at the base of the finger. This causes the tendon to become inflamed & swollen down there, and it "sticks" when the finger is bent, then pops through the opening of the sheath, like a trigger or switch being flipped. Then it sticks in the flexed position, and pops loose again when the finger is straightened. Gradually, the swelling/inflammation gets worse and worse, and progressively more stiff and painful. The repetitive motion causing the problem is--you guessed it--my guitar playing. At this point, I can't straighten the finger completely, and it takes about a half hour of stretching/limbering up the finger before I can play at all. And it hurts.
Up until now, I've been seeing an orthopedist and getting it treated with cortisone shots. Have had 3 or 4 of them thusfar. The problem is that they become less effective each time, and the problem recurs more quickly--and more severely--each time. So after a few shots, they recommend surgical repair to fix it for good. Which is scheduled for next Friday, Oct. 3. It's a very simple & quick procedure--an incision about 3/4" long on the palm of the hand just below the base of the finger, and then they just cut a vertical slice in the tendon sheath to open it up and stop the rubbing/irritation against the moving tendon. Very high success rate and you heal up in a couple/three weeks. But it's still some guy cutting into my fretting hand, which is cause for some degree of nervousness/concern. So say a little prayer for ol' DVM's frettin' hand, if you're a praying man/woman, or just keep your fingers crossed for me, if you're not. Thanks!! :AOK:
P.S. I can still solder fine with it!
Well, I've put this off as long as I can. I've been suffering from a chronic case of "trigger finger", a.k.a. flexor tendinitis, in the index finger of my left hand for about a year and a half now. For those who are unfamiliar with this condition, it's a repetitive motion injury caused by the tendon of the finger being irritated by sliding through the tendon sheath at the base of the finger. This causes the tendon to become inflamed & swollen down there, and it "sticks" when the finger is bent, then pops through the opening of the sheath, like a trigger or switch being flipped. Then it sticks in the flexed position, and pops loose again when the finger is straightened. Gradually, the swelling/inflammation gets worse and worse, and progressively more stiff and painful. The repetitive motion causing the problem is--you guessed it--my guitar playing. At this point, I can't straighten the finger completely, and it takes about a half hour of stretching/limbering up the finger before I can play at all. And it hurts.
Up until now, I've been seeing an orthopedist and getting it treated with cortisone shots. Have had 3 or 4 of them thusfar. The problem is that they become less effective each time, and the problem recurs more quickly--and more severely--each time. So after a few shots, they recommend surgical repair to fix it for good. Which is scheduled for next Friday, Oct. 3. It's a very simple & quick procedure--an incision about 3/4" long on the palm of the hand just below the base of the finger, and then they just cut a vertical slice in the tendon sheath to open it up and stop the rubbing/irritation against the moving tendon. Very high success rate and you heal up in a couple/three weeks. But it's still some guy cutting into my fretting hand, which is cause for some degree of nervousness/concern. So say a little prayer for ol' DVM's frettin' hand, if you're a praying man/woman, or just keep your fingers crossed for me, if you're not. Thanks!! :AOK:
P.S. I can still solder fine with it!